The maximum load is up to 220 lbs/100kgs now and yes, we use an electric engine with 2 motors.

We use cable(High strength polyethylene fiber thread).

We use motors to provide resistance(electromagnetic force).

Gym Monster has 10 different heights of the locking mechanism, including 306mm, 456mm, 606mm, 756mm, 906mm, 1056mm, 1206mm, 1356mm, 1506mm, 1656mm.

Yes! You can do overhead presses by moving the pulley assemblies to the pedal.

Yes! You can do both back squat and front squat.

Out patented Spotter Mode will automatically lower the resistance when you might have reached your limit or overload yourself during work-outs. 

*Remember to turn it on before training. And if you lost the grasp of the handle/bar during work-outs with the weight-on, the machine will automatically turn off the weight.

Currently the minimum weight for each side is 5lbs. And the minimum weight we can adjust is 1lbs.

We use 304 stainless steel and bearings of sufficient strength, plus durability tests show that there is no damage to the folding structure.

The support arm is made of 304 stainless steel + wear-resistant paint, while the sliding part we use engineering plastic with a small coefficient of friction as the medium.


The total resistance is 220lbs ( 100KG ). 50KG per arm. 

Does it have negative resistance?

It also has negative resistance, because it also has weight when it retracts, this means you need to use force against it as well.

The motor is designed to have a service life of 10,000 hours, and you use it for 2 hours a day, so that will last for 13 years.


We have different modes : 1 (SPOTTER) + 4 (STANDARD、CHAINS、ECCENTRIC、CONSTANT); 

SPOTTER : Spotters help you finish your last few reps when your muscles are fatigued, which is much harder to do when training by yourself.

STANDARD : The digital weight provided is constant; 

CHAINS : You can simulate the feeling of real chains, getting the benefits at the touch of a single button; 

ECCENTRIC : Adds more resistance when your muscles are at their strongest to work your muscles harder in every rep; 

CONSTANT : Maintain a balance of tension and contraction forces,used in strength tests and rehabilitation training;

Speediance’s accessories are equipped with a gyroscope. Together with the motor, it can determine the speed, distance, position and other data of the action during training, and detect and prompt you to correct your movements.

We will collect data of many categories (including gender, age, health status) to continuously train our AI. Currently, we have cooperated with the PROGRESS ONE organization of Duke University, and a PhD in rehabilitation medicine gave us guidance and advice. We will also cooperate with more organizations to continuously enrich our rehabilitation training in the future.

Yes, in addition to [pounds] units, we also have [Kg] units, you can change the units in settings.

We left a MIC for receiving voice control, which is not supported by the software at present, and it will be upgraded in the future.

Yes, we support Bluetooth connection. Our handles and barbell bar controllers are controlled via Bluetooth. The Bluetooth version is 4.0.

Yes, at the first time you using Speediance, we will guide you to do different exercises, conduct a whole body strength assessment, and recommend suitable weights for subsequent courses and exercises.

Yes, after you complete the strength assessment, Speediance can automatically set the appropriate weight for each movement.

Yes, we can provide a data analysis report for each training session, and use big data to guide strength growth training.

Yes, there will be a counting sound, and you can choose to turn the sound of the device on or off.

The system will be updated frequently and new features will be constantly added . One-click upgrades are automatically pushed to your device.

The online courses are unavailable without internet.

Yes, you can set and add the training content, number of groups, times, etc.




Keep the product away from heat sources and prevent it from being exposed to direct sunlight. Do not place it in wet or watery places, so as to prevent rust or degradation of insulation effect.When cleaning the product, please use a soft towel or sponge dipped in clear water or non-corrosive neutral detergent, and finally wipe it with clean water and dry it with a dry cloth. After cleaning, do not turn on the power supply until the product is dried.


The product cannot be disassembled, but there are 2 wheels on the back side of the bottom, which can push the product for easy movement. The weight of the product is 85kg, and you can put it on a trolley and move it in home.


The host machine does not need to be assembled, but the fitness bench and rowing bench need a simple screw work. Package measurement is 2380mm*800mm*480mm.